飞机静力试验中机翼的载荷分配研究

针对飞机静力试验加载的问题,为使得试验加载力反映飞机受力特性,由载荷分配前输入的典型剖面上剪力、弯矩、扭矩推导出相邻剖面之间的剪力、弯矩、扭矩,通过构造带内力约束的拉格朗日极值函数求出试验加载力,将载荷分配前输入的内力与试验载荷分配后产生的内力进行对比分析,可以得出:通过构造带内力约束的拉格拉日极值函数法分配得到的试验载荷符合载荷的传递,能够满足飞机静力试验加载的要求,可以用于飞机静力试验的加载。     

Is the phenology-based algorithm for mapping deciduous rubber plantations applicable in an emerging region of northern Laos?

Updated information of rubber plantations is essential for assessing socioeconomic and environmental impacts, especially in the emerging region of northern tropics. Here, a phenological method was modified to detect rubber plantations using Landsat Operational Land Imager (OLI) imagery in Phongsaly Province of northern Laos, where it begun a rubber boom in the mid-2000s due to geo-economic cooperation. It highlighted the landscape and pixel differences of deciduous rubber plantations in the tri-temporal phases (i.e., pre-defoliation, defoliation, and foliation) during the dry season due to phenological changes. Six commonly used vegetation indices (VIs), including the Normalized Difference Vegetation Index (NDVI), Enhanced Vegetation Index (EVI), Land Surface Water Index (LSWI), Atmospherically Resistant Vegetation Index (ARVI), Normalized Burn Ratio (NBR and NBR2) derived from OLI imagery during 2013–2016 were compared to determine the most suitable VI for discriminating the phenological differences of rubber plantations from natural forests. Then, the Differences of Normalized Burn Ratio (DNBR) was applied to generate the 30 m map of rubber plantations in 2016, by combining two masks of Landsat-derived forest and suitable elevation for rubber trees cultivation. The resultant map of rubber plantations had a classification accuracy of 93.7% and the Kappa coefficient of 0.848. Our study demonstrated the usefulness of the Landsat-derived tri-temporal phenological DNBR approach in an emerging region of northern Laos, despite requiring more scenes compared with single- and double temporal window methods.     

A CFD-based numerical virtual flight simulator and its application in control law design of a maneuverable missile model

A CFD-based Numerical Virtual Flight (NVF) simulator is presented, which integrates an unsteady flow solver on moving hybrid grids, a Rigid-Body Dynamics (RBD) solver and a module of the Flight Control System (FCS). A technique of dynamic hybrid grids is developed to control the active control surfaces with body morphing, with a technique of parallel unstructured dynamic overlapping grids generating proper moving grids over the deflecting control surfaces (e.g. the afterbody rudders of a missile). For the flow/kinematic coupled problems, the 6 Degree-Of-Freedom (DOF) equations are solved by an explicit or implicit method coupled with the URANS CFD solver. The module of the control law is explicitly coupled into the NVF simulator and then improved by the simulation of the pitching maneuver process of a maneuverable missile model. A nonlinear dynamic inversion method is then implemented to design the control law for the pitching process of the maneuverable missile model. Simulations and analysis of the pitching maneuver process are carried out by the NVF simulator to improve the flight control law. Higher control response performance is obtained by adjusting the gain factors and adding an integrator into the control loop.     

越肩发射反导拦截弹复合制导律研究

研究了优化反导拦截弹的越肩发射制导律,实现了对尾追目标的拦截,采用伪谱法和滑膜变结构理论设计了全弹道复合制导规律。利用Radau伪谱法求解以转弯时间最优为指标泛函的最佳转弯规律,通过曲线拟合给出了初制导转弯段的过载指令。选择零控脱靶量作为滑动模态对末制导律进行设计;利用这两种制导律的加速度指令构造了交接班导引律实现弹道的平滑。最后,对载机越肩发射反导拦截弹拦截来袭导弹的反导场景进行了数字仿真,结果表明所设计的复合制导律能够完成反导拦截任务。     

航空发动机静叶联调机构运动分析及优化

针对航空发动机可调静子叶片联调机构运动关系复杂、优化难度大的问题,研究了一种采用图解法和齐次坐标法结合MATLAB软件推导两级联调机构运动方程,并运用遗传算法对两级机构中的关键构件进行联合优化的方法。运用该方法对指定联调机构的两级曲柄可调端长度、可调端与固定端夹角进行了优化求解。得到了最优解,使得第一级摇臂转动角度是第零级摇臂转动角度的2倍，且第一级摇臂转动角速度也是第零级摇臂转动角速度的2倍。      

一种开关磁阻电机无位置传感器控制效率优化策略

针对开关磁阻电机(SRM)的简化磁链法只能实现单相导通运行且导通区间固定的缺点,提出了一种结合固定关断角和自适应调节开通角的无位置传感器控制技术。利用曲线拟合关断位置磁链取代传统存储数据表,通过对比实时计算的动态磁链和曲线拟合的静态磁链,确定关断位置信号并估计转速和其他位置。考虑电机阻抗和电感的非线性特点,优化电感最小区域的开通角自调节模型确定导通区间。仿真结果验证了该方案的可行性和正确性,能够实现转子位置的间接检测,电机的运行效率得到进一步优化。     

边缘计算在电机远程运维系统中的应用探讨

介绍了边缘计算的基本概念及与云计算的对比。针对电机远程运维需求,介绍了电机远程运维系统的架构及主要功能。在描述边缘侧设备与远程运维平台的数据交互过程的基础上,详细阐述了边缘计算在电机远程运维系统中的应用。     

辐射换热对平板气膜冷却性能影响

为了分析辐射换热对平板气膜冷却性能的影响,分别对不考虑辐射换热(耦合计算)与考虑辐射换热两种条件下的平板隔热屏进行了三维流热耦合数值模拟研究,并与绝热壁(不考虑隔热屏固壁导热)的计算结果进行了对比。辐射换热采用离散坐标法。得到了3种不同主/次流总温比(Rt)条件下气膜冷却效果、流场、单位面积冷流体热负荷以及流量系数的对比结果与变化规律。结果表明:气膜冷却效果沿流向逐渐降低,且随总温比的增加而降低;在展向上气膜冷却效果呈现中间高两边低的分布规律,最大与最小相对值在绝热壁条件下达到最大,为94.5%,辐射换热次之,为13.5%,不考虑辐射换热时最小,为9.8%。与不考虑辐射换热结果相比,辐射换热对气膜冷却效果的影响在流动方向逐渐变大,气膜孔附近展向温度梯度增大,冷流体热负荷增加了92.8%,二者计算的流量系数相差不大,为1.1%,与绝热壁计算结果相比,流量系数减小了13.1%。随着总温比增加流量系数减小,最大值与最小值相差不大,为1.1%。     

白天激光漫反射测距中微弱信号检测的单开门多触发方法

白天激光漫反射测距因存在强背景噪声,导致微弱回波信号的检测十分困难,严重限制了激光漫反射测距的广泛应用。因此,提出了采用单开门多触发方法解决白天激光漫反射测距的微弱信号检测难题。首先,介绍了一种GM-APD (Geiger-ModeAvalanchePhotoDiode,盖革模式雪崩光电二极管)多触发概率分布函数的快速求解方法。接着,取激光漫反射测距系统典型参数,理论分析了多触发情况下的回波信号检测概率,分析结果表明单开门多触发方法可提高激光漫反射测距在白天情况下的回波信号检测概率。同时,通过对触发次数限制的优选,可以增加有效检测比,减少白天观测条件下回波信号的提取代价。最终,通过系统仿真验证了理论分析结果的正确性。因此,单开门多触发方法是解决白天激光漫反射测距微弱信号检测的可行途径之一。     

永磁约束电子束轨迹实验研究

通过设计并运用一种直流电子束轨迹简易测量方法,开展了永磁约束电子束轨迹实验研究,得到了永磁铁环对60~80 ke V电子束约束作用的实验数据。结果表明:该测量方法方便有效,结果较为准确;永磁铁对电子束聚焦作用明显,并呈现出一定的规律性。对永磁铁约束电子束研究工作奠定了基础。